- Anti-condensation Paint
- Helps Reduce Condensation Forming
- Can Be Overcoated
- Reduces Discolouration
- Suitable for Plaster & Wood
- Slightly Textured Matt White Finish
- Apply by Roller or Brush
- Touch Dry in Two Hours
- Estimated Coverage Area 8-10m² Per Litre
Surface Preparation
All surfaces should be clean, dry, sound and free from contaminants and grease. Scrape and brush the surface to remove any loose flaking material. Flat down glossy surfaces with abrasive paper. Treat any mould or lichen with a proprietory mould remover with a scraper or a stiff brush then treat again. Prime bare metal areas with Coo-Var All Metals Primer.
Application Conditions
Do not apply below 10 °C. As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying.
Preceding Coat
Coo-Var All Metals Primer on bare metal.
Subsequent Coat
2 Full coats of Coo-Var Anti-Condensation Paint. The final coat may be overcoated with emulsion paints.
Download Technical Data Sheet (ANTI_CONDENSATION_PAINT_TDS_CV.pdf)
Download Safety Data Sheet (350-W475_-_ANTI-CONDENSATION_PAINT_-_WHITE_-_SDS11540_-_UK.pdf)
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.