Rustins Quick Dry White Satin Paint

Rustins Quick Dry White Satin Paint is a water-based, hard-wearing satin finish white paint that is for both interior and exterior use.

Ideal for use on wood and metal surfaces, including doors, window frames, wardrobes, dressers, sideboards, tables and chairs. Excellent covering power. Low odour. 

During preparation, surfaces to be coated must be clean, dry and free from wax, grease and contaminants. If already painted, remove flaking paint by scraping or with Rustin’s Strypit Paint and Varnish Stripper.

If applying to metal, remove any rust with a scraper or with Rustin’s Rust Remover and apply one coat of Rustin’s Red Oxide Metal Primer. If applying to bare wood, apply a coat of Rustin’s Quick Dry Primer and Undercoat.

Apply liberally and evenly with a synthetic fibre brush. A short-haired varnish roller can be used but it is best applied by brush.

Three coats are recommended as standard while two is advised on previously painted surfaces. Touch dry within 30 minutes, depending on temperature and humidity. Wait a minimum of two hours before re-coating depending on conditions - ideally, 15-25° C. Do not use below 10°C or in conditions of high humidity.

Coverage is approximately 13 sq.m per litre per 1 coat, depending on the absorbency of the surface.

Rustins Quick Dry White Satin Paint is sold in 250ml, 500ml and 1L containers.

Full product data sheets and safety data sheets are available on request.